A Level Application
project report helper|
Active In SP
Joined: Sep 2010
05-10-2010, 04:36 PM
A Level Application.docx (Size: 19.97 KB / Downloads: 36)
A Level Appli cation
Now that we've seen how registers work, let's process a program like PLCs do to enhance our understanding of how the program gets scanned.
Let's consider the following application:
We are controlling lubricating oil being dispensed from a tank. This is possible by using two sensors. We put one near the bottom and one near the top, as shown in the picture below.
Here, we want the fill motor to pump lubricating oil into the tank until the high level sensor turns on. At that point we want to turn off the motor until the level falls below the low level sensor. Then we should turn on the fill motor and repeat the process.
Here we have a need for 3 I/O (i.e. Inputs/Outputs). 2 are inputs (the sensors) and 1 is an output (the fill motor). Both of our inputs will be NC (normally closed) fiber-optic level sensors. When they are NOT immersed in liquid they will be ON. When they are immersed in liquid they will be OFF.