A Vision-Guided Autonomous Vehicle
Active In SP
Joined: Oct 2010
25-10-2010, 04:58 PM
a vision-guided autonomous vehicle project and implimentation developed at California State University is described in this article. In these devices, an ordinary radio-controlled toy car is fitted with a charge-coupled device (CCD) camera and a transmitter.The tasks of control of the car and the Image processing are done by the PC. The camera captures the image of the road and transmits it to the PC via a transmitter–receiver pair at 900 MHz. The image is digitised by a frame grabber board.An image-processing program subsequently analyzes the road condition and generates adequate drive commands. Then these commands are transmitted back to the vehicle through the radio controller which is built in. The programs are written to compete in racing or maze solving. This article presents the detailed software and hardware
THE PROPOSED VISION-GUIDED
AUTONOMOUS VEHICLE COMPETITION
CCD cameras, frame grabbers, and related products are used in this competetion.
radio-controlled toy car is used. There is a steering mechanism witha gear train. three C batteries is sued.
black and white CCD camera with
a built-in wide angle lens is used. The main reason for choosing this is that it is inexpensive.
It can deliver quality video signal at 900 MHz with a range of 125 ft.
The receiver output is given to a VCR which produces an RS-170 video signal on its VIDEO OUT connector which is taken in
Video Frame Grabber
a low-cost video frame grabber was built from scratch.
Interface to the Hand-Held Controller
for more details, see this report:
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
|Tagged Pages: vision control of vehicle,|