Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report helper
Active In SP

Posts: 2,270
Joined: Sep 2010
16-10-2010, 05:05 PM

.pdf   cfd analysis of pulse tube.pdf (Size: 197.24 KB / Downloads: 211)

Banjare Y. P. *, Sahoo R. K., Sarangi S. K.
Department of Mechanical Engineering, NIT Rourkela-769008, Orissa

Abstract A commercial Computational fluid dynamics (CFD) software package Fluent 6.1 is used to model the oscillating flow inside a pulse tube cryocooler. In this paper analysis of orifice type pulse tube refrigerator (OPTR) systems operating under a variety of thermal boundary conditions are modeled at different frequencies. The compressor used is having dual opposed piston arrangement. The simulations are done at different frequencies with helium as working fluid. The simulated OPTR consists of a compressor (dual opposed piston), a transfer line, an after cooler, a regenerator, a pulse tube, a pair of heat exchangers for cold and hot end, an orifice valve and a reservoir. The simulation represents fully coupled systems operating in steady-periodic mode. The externally imposed boundary conditions are a cyclically moving piston wall at one end of the tube and constant temperature or heat flux boundaries at the external walls of the hot end and cold end heat exchangers. The experimental method to evaluate the optimum parameters of OPTR is difficult. On the other hand, developing a computer code for CFD analysis is equally complex. The objectives of the present investigation are to ascertain the suitability of CFD based commercial package, Fluent and also to examine the performance for the effect of compressor frequency on the orifice type pulse tube refrigerator (OPTR). The results confirm that CFD based Fluent simulations are capable of elucidating complex periodic processes in OPTRs. As a result, the performance analysis also shows that an optimum frequency always exists corresponding to the minimum cold end temperature for same operating boundary conditions. Results show that at high frequency the secondary-flow recirculation occur at the vicinity of component-to-component junctions to reduce the heat pumping effect from low temperature heat exchanger (HX) to high temperature HX. On the contrary, at low frequency, the low pumping rate affects to achieve the minimum temperature. Hence the system performance is best achieved at an optimum frequency.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: seminar topics related cfd, how to do simulation cfd pdf, seminar topic using cfd, fluent oscillating flow, pulse tube refrigerator ppt, pulse tube cfd, cfd simulation on pulse tube cryocooler,
Popular Searches: cfd services, applications of cfd in mechanical, orifice and mouthpiece ppt file, nozzle orifice, orifice meter doc, m e cfd project ideas, ansys fluent training ppt,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  pulse detonation engine ppt jaseelati 0 267 02-03-2015, 02:35 PM
Last Post: jaseelati
  Solar Powered Refrigerator computer science crazy 22 22,415 24-10-2013, 10:46 PM
Last Post: Guest
  DOMESTIC LPG REFRIGERATOR seminar tips 3 1,623 31-08-2013, 09:47 AM
Last Post: study tips
  Study of Pulse Tube Cryocooler study tips 0 386 10-08-2013, 12:57 PM
Last Post: study tips
  Study of Thermoacoustic Refrigerator Report study tips 0 421 10-08-2013, 12:45 PM
Last Post: study tips
  How to Design a Shell-and-Tube Heat Exchanger study tips 0 412 03-08-2013, 12:15 PM
Last Post: study tips
  SOLAR POWERED REFRIGERATOR seminar projects crazy 14 11,637 08-07-2013, 09:42 AM
Last Post: study tips
  CFD analysis of fin tube heat exchanger with a pair of delta winglet vortex pdf study tips 0 297 20-06-2013, 03:16 PM
Last Post: study tips
  PULSE DETONATION ENGINE ( Source Code ) study tips 0 308 11-06-2013, 03:53 PM
Last Post: study tips
  SIMULATION OF TUNNELING OPERATIONS pdf study tips 0 394 01-06-2013, 04:26 PM
Last Post: study tips