DG ENGINE full presentation
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar class
Active In SP

Posts: 5,361
Joined: Feb 2011
26-02-2011, 10:20 AM

presented by:

.ppt   DG Engine Presentation.ppt (Size: 1.35 MB / Downloads: 183)

• Diesel engine (also known as a compression-ignition engine and sometimes capitalized as Diesel engine) is an internal combustion engine that uses the heat of compression to initiate ignition to burn the fuel, which is injected into the combustion chamber during the final stage of compression. This is in contrast to spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to gasoline), which uses a spark plug to ignite an air-fuel mixture. The diesel engine is modeled on the Diesel cycle.
Major Parts of Engine:
Cylinder Blocks * Water Pumps * Crankshafts * Oil Pumps * Camshafts
Turbochargers * Governors * Fuel Pumps * Flywheel Housings
Manifolds * Oil Cooler Groups * Flywheels * Gear
Engine operation
Intake stroke

Piston moving down
Intake valve open
Exhaust valve closed
Pure air gets sucked in by the piston sliding downward.
Compression stroke
Piston moving up
Intake valve closed
Exhaust valve closed
The piston compresses the air above and uses thereby work, performed by the crankshaft
Power stroke
Piston moving down
Intake valve closed
Exhaust valve closed
In the upper dead-center, the air is max. Compressed: Pressure and Temperature are very high. Now the black injection pump injects heavy fuel in the hot air. By the high temperature the fuel gets ignited immediately (auto ignition). The piston gets pressed downward and performers work to the crankshaft.
Exhaust stroke
Piston moving up
Intake valve closed
Exhaust valve open
The burned exhaust gases are ejected out of the cylinder through a second valve by the piston sliding upward again.
Each stroke takes 180° of crankshaft rotation to complete
All cylinders fire in 720° of crankshaft rotation
720 divided by number of cylinders = firing interval
Odd fire V-6 engine (90° block with 120° rod journals)
Piston dwell time
Piston travel is at a minimum. . .
Crank moves horizontally
Piston velocity
Maximum when rod is 90° to crank
Maximum 30° earlier
Best VE is obtained by synchronizing valve opening with piston speeds
Other engine cycles

Both valves are open
End of exhaust & start of intake
Low pressure in exhaust port
Blow down
Exhaust valve opens before BDC
To help evacuate cylinder before piston reverses
Pumping losses at end of exhaust stroke

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: d g engine, dg presentation topics, presentation about diesel engines, diesel engine, presentation for diesel engine, www free download dgengine com, engine presentation,
Popular Searches: overheating engine presentation, al31fp engine presentation, achyuth balakrishnan,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  robots in radioactive environment full report project report tiger 14 16,532 27-04-2015, 07:00 PM
Last Post: Guest
  pulse detonation engine ppt jaseelati 0 266 02-03-2015, 02:35 PM
Last Post: jaseelati
  engine knocking ppt jaseelati 0 291 23-02-2015, 03:45 PM
Last Post: jaseelati
  ball piston engine wikipedia jaseelati 0 353 10-02-2015, 01:17 PM
Last Post: jaseelati
  air brake system paper presentation ppt jaseelati 0 317 29-01-2015, 03:23 PM
Last Post: jaseelati
  activa engine diagram jaseelati 0 249 22-01-2015, 03:15 PM
Last Post: jaseelati
  cryogenic rocket engine ppt jaseelati 0 271 13-01-2015, 01:40 PM
Last Post: jaseelati
  automatic brake failure indicator and engine overheating alarm pdf jaseelati 0 387 07-01-2015, 02:34 PM
Last Post: jaseelati
  Pistonless Pump for Rockets full report and ppt project topics 8 10,464 15-11-2014, 04:08 PM
Last Post: mkaasees
  latest mechanical seminar or presentation topics 2011 & 2012 project topics 40 113,312 08-07-2014, 11:03 PM
Last Post: Guest