Light-sensitive Alarm Project
Active In SP
Joined: Sep 2010
01-10-2010, 03:29 PM
The circuit detects a sudden shadow falling on the light - sensor and sounds the bleeper when this happens. The circuit will not respond to gradual changes in brightness to avoid false alarms. The bleeper sounds for only a short time to prevent the battery running flat. Normal lighting can be used, but the circuit will work best if a beam of light is arranged to fall on the light-sensor. Breaking this beam will then cause the bleeper to sound. The light sensor is an LDR (light-dependant resistor), this has a low resistance in bright light and a high resistance in dim light.
• The light-sensitivity of the circuit can be adjusted by varying the 100k preset.
• The length of bleep can be varied from 0.5 to 10 seconds using the 1M preset.
Using the 7555 low-power timer ensures that the circuit draws very little current (about 0.5mA) except for the short times when the bleeper is sounding (this uses about 7mA). If the circuit is switched on continuously an alkaline PP3 9V battery should last about a month, but for longer life (about 6 months) you can use a pack of 6 AA alkaline batteries.
For more details, please visit the following thread.
|Popular Searches: why create light sensitive trigger project, information about light sensitive trigger, abstract of light sensitive alarm, sensitive alarm, light sensitive alarm ppt, light sensitive eyes, light sensitive alarm seminar,|