Modems and ISDN
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Computer Science Clay
Active In SP

Posts: 712
Joined: Jan 2009
25-02-2009, 02:51 PM

Modems and ISDN

The modern telephone system is designed to carry the sound of a human voice talking normally. The engineers save money by cutting out the high a low pitch sounds that occur only in music, or sounds that last for a very short period of time. Modems convert data into sound so that it can be sent through the phone system. Just as the telegraph sent data by alternating dots and dashes, the earliest modems sent data by alternating the sound on a phone between two tones. However, modern modems move much larger amounts of data by sending combinations of tones at different frequencies. If you have access to all possible frequencies, there is an enormous amount of data you can carry. Each TV channel is about 3 Megabits of data per second, and a cable system carries nearly 100 channels.

However, the telephone system is designed to only handle the frequencies of the human voice, and the maximum amount of data it can theoretically carry is 4000 bytes per second per phone line. Trying to squeeze as much data as possible into the available frequencies makes the signal vulnerable to "noise" that is introduced from a bad connection, "crosstalk" from other phone conversations in the same bundle of wires, and external electrical sources. Computer chips made it possible to build a "smart" modem that transmits a block of data, waits for an acknowledgment, and retransmits the block if it something went wrong the first time.

Then data compression was added. In current use, the information actually exchanged between the two modems may be much more complicated and sophisticated than the data that either computer sees.Digital phone equipment is used everywhere except at your home or office. Since the limit on data transmission is caused by the conversion of sound to a digital signal, the obvious direct solution to the problem is to extend digital signaling all the way to the home. A T1 line would provide this type of connection. It carries 24 phone circuits each with 8000 bytes per second, or a single circuit of around 1.5 Million bits per second.
Use Search at wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
seminar class
Active In SP

Posts: 5,361
Joined: Feb 2011
23-02-2011, 11:53 AM

.docx   modems.docx (Size: 433 KB / Downloads: 62)
MODEM = MOdulateur - DEModulateur
Le rôle d’un modem est d’adapter le signal d’un message au support de transmission
utilisé. Nous n’étudierons ici que les modems destinés au RTC (Réseau Téléphonique
1.3 puissance - affaiblissement
◊ Affaiblissement : A = 10 log (Ps/Pe)
sur RTC l’affaiblissement maximum est d’environ 30 dB.
Attention, derrière certains PABX il peut y avoir un léger gain qui perturbe la
réception de certains modems.
◊ Puissance : elle s’exprime en dBm (0 dBm = 1mW)
Sur RTC un modem émet habituellement à -10dBm (distorsion et écho au delà).
Un modem doit être capable de décoder un signal compris entre 0dBm (maximum du
signal sur RTC) et -43..-48dBm (hystérésis du 109).
 Bruit blanc : provoqué par l’agitation thermique, son spectre est plat.
 Bruit impulsionnel : provoqué par des évènements extérieurs (couplages
électromagnétiques, orages...). Il est source d’erreurs imprévisibles.
 Rapport Signal/Bruit : Puissance signal / puissance bruit (en dB)
Sur lignes analogiques , S/B est de 25dB minimum.
Sur lignes numérisées , S/B maximum = bruit de quantification = 38dB (selon loi A
ou loi µ pour un signal de -5dBm à -30dBm).
Rapidité de modulation
La rapidité de modulation est le nombre d’états significatifs par seconde.
R = 1/∆ en Bauds
(∆ = durée d’un état).
Nyquist à démontré (en 1924) que :
RMAX = 2 W
W = Bande passante du support.
sur RTC la bande est comprise entre 300Hz et 3400Hz donc W=3100Hz
Rmax = 6200 Bauds.
1.4 Débit (vitesse de transfert)
Le débit en ligne s’exprime en bits par seconde (bit/s), c’est la seule grandeur qui
intéresse l’utilisateur.
D = R log2 V

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: modem and isdn pdf files, ppt isdn modem, ppt modem isdn, topic on modems and isdn, abstract of modems isdn, isdn full seminar report, modems nd isdn,
Popular Searches: isdn architecture wikipedia, technical seminar onmodems and isdn, broadband narrowband isdn ppt, narrowband vs broadband isdn pdf, cours sur vanetmobisim, isdn narrowband, pdf on narrowband isdn and broadband isdn,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  ISDN REPORT study tips 0 303 17-05-2013, 04:13 PM
Last Post: study tips
  Modems: An Introduction pdf project girl 0 339 27-12-2012, 04:54 PM
Last Post: project girl
  TYPES OF MODEMS PPT project girl 0 1,124 28-11-2012, 06:15 PM
Last Post: project girl
  TYPES OF MODEMS seminar tips 0 313 20-11-2012, 04:02 PM
Last Post: seminar tips
  ISDN full report seminar tips 0 340 19-11-2012, 03:39 PM
Last Post: seminar tips
  Integrated Services Digital Network (ISDN) seminar flower 1 914 07-08-2012, 03:59 PM
Last Post: seminar flower
  OBJECT ORIENTED ANALYSIS AND DESIGN TWO MARK AND SIXTEEN MARK Q and A seminar ideas 0 263 26-06-2012, 04:42 PM
Last Post: seminar ideas
  Wireline Quality Underwater Wireless Communication Using High Speed Acoustic Modems project uploader 0 616 23-02-2012, 10:52 AM
Last Post: project uploader
  Cable Modems computer science crazy 1 1,433 07-03-2011, 04:09 PM
Last Post: seminar class
  B-ISDN Reference Model computer science crazy 0 2,924 03-09-2009, 04:51 PM
Last Post: computer science crazy