Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Active In SP

Posts: 1,124
Joined: Jun 2010
12-10-2010, 11:29 AM

.doc   spyear.doc (Size: 646 KB / Downloads: 221)



With this sound amplifier, you can now hear things crystal clear that you could never hear before. Spy ear is very easy to use, just put the ear buds in your ears - aim the Spy Ear towards what you want to hear and things are heard crystal clear. Spy Ear has adjustable volume control, which amplifies sound up to 50 decibels. Spy ear is also great for watching TV late at night, while your spouse sleeps you can keep the sound on the TV way down and still hear clearly.


What binoculars do to improve your vision, this personal sound enhancer circuit does for listening. This lightweight gadget produces an adjustable gain on sounds picked up from the built-in high-sensitivity condenser microphone. So you can hear what you have been missing. With a 6V (4×1.5V) battery, it produces good results. a small signal amplifier is built around transistor BC547 (T1). Transistor T1 and the related. components amplify the sound signals picked up by the condenser microphone (MIC).

The amplified signal from the preamplifier stage is fed to input pin 3 of IC LM386N (IC1) through capacitor C2 (100nF) and volume control VR1 (10-kilo-ohm log). A decoupling network comprising resistor R5 and capacitor C3 provides the preamplifier block with a clean supply voltage. Audio amplifier IC LM386N (IC1) is designed for operation with power supplies in the 4-15V DC range.

It is housed in a standard 8-pin DIL package, consumes very small quiescent current and is ideal for battery-powered portable applications. The processed output signal from capacitor C2 goes to one end of volume control VR1. The wiper is taken to pin 3 of LM386N audio output amplifier. Note that the R6-C4 network is used to RF-decouple positive-supply pin 6 and R8-C7 is an optional Zobel network that ensures high frequency stability when feeding an inductive headphone load.
Capacitor C6 (22μF, 16V) wired between pin 7 and ground gives additional ripple rejection. The output of LM386N power amplifier can safely drive a standard 32-ohm monophonic headphone/earphone. Assemble the circuit on a small general-purpose PCB and house in a suitable metallic enclosure with an integrated battery holder and headphone/ earphone socket as shown in . Fit the on/off switch (S1), volume control (VR1) and power indicator (LED1) on the enclosure. Finally, fit the condenser microphone (MIC) on the front side of the enclosure and link it to the input of the preamplifier via a short length of the shielded wire.
Thinking To Register

25-11-2015, 01:03 PM

how long will spy ear can pick up a sound so as we ca hear clearly

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: spy ear software, spy ear applications, seminar on spy ear, spy ear application pdf, materail on spy ear, spy ear presentation, spyear introduction,
Popular Searches: what is use of mic in night alert miniproject, abstract on spy ear, spy ear as a project, spy ear description, spyear app, spyear introduction, pcb designing of spy ear,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)