Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar surveyer
Active In SP

Posts: 3,541
Joined: Sep 2010
16-10-2010, 01:56 PM

Submitted by:
Akash Verma

.pptx   SUMMER TRAINING REPORT-bsnl.pptx (Size: 123.97 KB / Downloads: 927)

B.S.N.L. – An Introduction

Bharat Sanchar Nigam Limited (known as BSNL, India Communications Corporation Limited) is a state-owned telecommunication
company in India.
BSNL is the sixth largest cellular service provider, with over 57.22 million customers as of December 2009 and the largest land line telephone provider in India.
Its headquarters are at Bharat Sanchar Bhawan, Harish Chandra Mathur Lane, Janpath, New Delhi. It has the status of Mini Ratna, a status assigned to reputed public sector companies in India.
BSNL is India's oldest and largest Communication Service Provider (CSP). Currently has a customer base of 90 million as of June 2008. It has footprints throughout India except for the metropolitan cities of Mumbai and New Delhi which are managed by MTNL.
As on March 31, 2008 BSNL commanded a customer base of 31.55 million Wireline, 4.58 million CDMA-WLL and 54.21 million GSM services.
Thinking To Register

19-06-2012, 04:46 PM

please mail me bsnl summer training email id is
seminar flower
Super Moderator

Posts: 10,120
Joined: Apr 2012
17-08-2012, 10:32 AM

Summer Training at BSNL

.doc   1BSNL.doc (Size: 281 KB / Downloads: 219)


From the ancient days it has been deepest human desire to stay closed with those they need. Many different ways have been evolved and implemented to fulfill this; Telephony is also such a mechanism that uses Telephone, electronic equipment that converts sound into electrical signals that can be transmitted over distances and then converts received signals back into sounds.
Electronic exchanges play major role in this system. It’s a workplace that serves telecommunication facilities where lines from telephones can be connected together to permit communication. The switching center that houses the terminating and switching equipment is called TELEPHONE EXCHANGE. Following are the types of exchanges


Digital switching has become a synonym for time division multiplex. In digital switching system, digital signals are switched in two nodes, time switching and space switching. Time switching basically involves rearrangement of channel sequence in the same PCM from whereas space switching involves interconnection of same channels of a different PCM high way. In a practical digital switching both time and space switching stage is employed to increase the traffic handling capacity of the switch at minimum cost. Among the various possible combinations TST structure is most commonly used.
Synchronization of various exchange clocks in a digital network is essential to provide required services. Causing a slip due to mismatch between the clocks will result in multination of information and description of services. Hence, slip has to be controlled using plesiochronous and synchronous approaches.


Often the message signal is not suitable for transmission over the medium in its original forms. Therefore, the message signal is located in a carrier wave, which is more suited for transmission over the medium. This process is called modulation of the carrier wave. At the receiving end station the message signal received back from the incoming modulated carrier wave by a process is called demodulation which is inverse of modulation.


Modulation enables multiple message signals to be simultaneously transmitted over the same medium without interfering each other. Transmission of multiple message signals simultaneously over a medium is called multiplexing.
Modulation is essentially a process of relocation of a message signal in a carrier wave, which is more suitable for transmission for transmission over the medium than the message signal itself.
Three types of modulation can occur-
1. Amplitude modulation
2. Frequency modulation
3. Pulse modulation


One of the primary requirements of any computer system is that service will be available to the subscriber at any time. In the vast majority of exchanges the electrical energy required for signaling, switching, speed transmission mains. The exchange power system is designed to provide continuous and uninterrupted telephone service even when the public electric fails. We can divide power plant in three major blocks such as


A microprocessor is a complex electronic processor on a single silicon chip (Large-scale integrated circuit). It is capable of performing arithmetic and logical functions under the control of program.
Functional units of microprocessor-
1. Arithmetic and logic unit
2. Registers (Temporary memory)
3. Timing and control unit



Bus System

Various switching peripherals are connected to central processor by means of a common bus system. A bus is a group of wires on which data and command pulses are transmitted between the various sub units of a switching processor and switching peripherals. The device to be activated is addressed by sending its address on address bus. The common bus system avoids costly interconnection among various devices (Fig-6).

I.S.D.N (Integrated service digital network)-

Presently, there is a multiplicity of services such as telephoning, telex, data cable television etc. that are provided by separate dedicated network for each of them. These non-integrated services require separate switching system. Special subscribers access plants, individual trunk networks and separate operations and maintenance staff. These services are costly to the subscriber as well as to department. In I.S.D.N, these services are provided by one integrated network, which can be accessed by different customer premises equipment.
In I.S.D.N, subscriber loop from the local exchange will be terminated at the network terminal (N.T). From N.T the signal will be distributed to the information sockets. These information sockets will be distributed in the premises just like power sockets are distributed for providing on the information sockets, different terminals for voice and nonvoice services can be connected.

Electronic Exchange

These are entirely computerized and electronic devices, which work on store programme control. Electronic logic component can do ten thousand times operation during signal in the comparison of electromechanical exchange.

In an electronic exchange a single control device simultaneously process a number of calls on time-sharing basis. Such centralization is more economical, but it is disadvantageous in making switching system more vulnerable to system failure. This, however, can be overcome a standby control devices.
These electronic exchanges have powerful processing unit. Part of control equipment capacity utilize for function other than for processing. There are two types of electronic exchange.
seminar tips
Super Moderator

Posts: 8,857
Joined: Oct 2012
31-10-2012, 11:52 AM

to get information about the topic"electronics engineering training of bsnl" full report ppt and related topic refer the link bellow

http://seminar and presentationproject and
Thinking To Register

14-07-2013, 07:26 PM

study tips
Super Moderator

Posts: 10,180
Joined: Feb 2013
15-07-2013, 09:44 AM

To get full information or details of SUMMER TRAINING REPORT Held At BSNL please have a look on the pages

if you again feel trouble on SUMMER TRAINING REPORT Held At BSNL please reply in that page and ask specific fields in SUMMER TRAINING REPORT Held At BSNL

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: summer training reports in bsnl on gsm, bsnl summer training in mumbai, bsnl report on summer training for cse, bsnl training report switching, summer traning report on tele communication, summer training report of bsnl, bsnl cdma,
Popular Searches: taining need process mba project**n marathi pdf download, bsnl ppt summer training for computer science, bsnl summer training 2013 in lko, bsnl summer training report pdf, training development process of bsnl, report on bsnl summer training for four week, ipt bsnl in tirunelveli,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  summer training internship report Guest 2 46 06-08-2016, 02:41 PM
Last Post: Dhanabhagya
  ACE-9 FORM IN BSNL Guest 1 121 06-06-2016, 02:14 PM
Last Post: Dhanabhagya
  SUMMER TRAINING AT MECON LIMITED, RANCHI, JHARKHAND report project girl 13 6,345 07-04-2014, 08:42 PM
Last Post: Guest
  VOCATIONAL TRAINING AT DOORDARSHAN KENDRA, RANCHI, JHARKHAND report project girl 4 2,946 05-11-2013, 08:28 AM
Last Post: Guest
  Industrial Summer Training at NTPC Badarpur seminar flower 4 9,282 27-10-2013, 12:44 AM
Last Post: Guest
Last Post: study tips
  practical training at UPSRTC WORKSHOP full report project report helper 9 6,473 10-09-2013, 09:30 AM
Last Post: study tips
  TRAINING & DEVELOPMENT IN HOTEL INDUSTRY REPORT study tips 0 532 06-09-2013, 04:39 PM
Last Post: study tips
Last Post: study tips
  SUMMER TRAINING PROJECT REPORT - India Yamaha Motor Pvt. Ltd. project girl 3 3,617 27-08-2013, 09:44 AM
Last Post: study tips