Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science technology
Active In SP

Posts: 740
Joined: Jan 2010
24-01-2010, 03:36 PM



Object Identification plays an important role in various applications ranging from robotics to computer vision. Artificial neural network (ANN) is being used for in various pattern recognition applications due to the advantages of ability as well as adaptability to learn. This paper presents identification of object independent to size, position and orientation using the concept of ANN and moments. The image of the object is taken with the help of the tactile sensing system. This paper describes the complete hardware and software concepts of the system for the object identification with the help of ANN.
Keywords: Tactile sensing, Object orientation, force sensing sites.

Of the many sensing operations performed by the human beings, the one that is probably the most likely to be taken for granted is that of touch. Touch is not only complementary to vision, but it offers many powerful sensing capabilities. Tactile sensing is another name of touch sensing, which deals with the acquisition of information about the object simply by touching that object .Touch sensing gives the information about the object like shape , hardness , surface details and height of the object etc. Tactile sensing is required when an intelligent robot wants to perform delicate assembly operations. During this assembly operation an industrial robot must be capable of recognizing parts, determining their position, orientation and sensing any problem encountered during the assembly from the interface of the parts.
Keeping all these things in mind a tactile sensing system is developed which uses image processing techniques for preprocessing and analysis along with ANNâ„¢s for object identification. Classification of the object independent of translation, scale, rotation is a difficult task. The concept of artificial neural network is used in this system for the proper identification of the object irrespective to their size, position and the orientation.

This system uses conductive elastomer as a sensor, which has property that its conductivity changes as the function of the pressure. Fig 1 shows the configuration of the system. The conductive elastomer is mounted on 8*8 force sensing sites for the measurement of pressure distribution on the object. These force sensing sites are connected through the PC add-on data acquisition card. Stepper motor is used to apply specific amount of pressure for proper identification of the objects. Hardware for scanning the matrix and related signal conditioning is designed along with the stepper motor interface circuitry. Once the image of the object is acquired through the tactile sensing system then it is further processed using image processing concepts for the proper identification and inferring other properties of the objects. Tactile data for the object identification is acquired using row-scanning technique. After the removal of noise from this tactile data it passes to the different modules of the system for further processing.

Main modules of this system are preprocessing, data acquisition, matrix representation graphical representation, edge detection and moments calculations for generating a feature vector. Tactile image acquisition involves conversion of the pressure image into an array of numbers that can be manipulated by the computer. In this system tactile sensor is used to obtain the pressure data of the object and this data is further acquired with the help of data acquisition and data input output card, which are interfaced with the computer. The preprocessing module involves in the removal of the noise, which is essential for acquiring the image of the object under consideration. The image is analyzed by a set of numerical features to remove redundancy from data and reduce its dimensions. Invariant moments are calculated in this module which is required by the next module to the artificial neural for the identification of the object independent to scale, rotation and position.

Main module of this system includes the description of the system and gives many options to the user for processing the tactile data in different forms like automatic or manual processing of the data. Feature extraction module is used for the calculation of the moments from the acquired tactile data. The application of moments provides a method of describing the object in terms of its area, position and the orientation. These invariant moments are used by the ANN as the input neurodes which is the important data for the classification and identification of the object.

Artificial neural network, which is inspired from the studies of biological nervous system, has been used for various applications like supervised classifier. Object identification is decision making process that requires the neural network to identify the class and category, which best represent the input pattern.

To overcome the difficulty of identifying the object using the moment alone use of artificial neural networks for the same purpose was investigated. The back propagation algorithm was implemented in the software to generate three-layered network. The feature vector was given as the input layer to the network. The number of input neurodes was equal to the number of feature vectors (invariant moments). The number of output neurodes was kept equal to the number of the objects to be identified. Here it was considered only five objects like square, triangular, rectangular, bar, circle. Several experiments were carried out and it was observed that for input neurodes equal to the seven, hidden neurodes required were three .Increase in hidden neurodes increase the complexity of the network and also increases the computational time of the system .Also less number of hidden neurodes takes longer time to be trained .Hence the optimum value of hidden value to be decided for the use of artificial neural network.

Stepper motor is used for exerting specific amount of pressure on the object, which is required for the handling of delicate objects, getting proper image of the object and calculating the height of object .First of all stepper motor is arranged in such a way that its angular motion is converted into the linear motion and it was designed in such a way that it travels linear distance of 0.03 mm per step. This part of calibration is also used for calculating the height of the object .To begin with ,motion of the stepper motor was calibrated in terms of pressure applied and the linear displacement . Pressure calibration of stepper motor is done with the help of capacitor pressure sensor in which foam is used as dielectric between two parallel plates of the capacitor .First graph was plotted pressure verses the change in the value of the capacitance .Response of the same is shown in Graph1. Then the same capacitive tactile was used to find the number of steps verses change in capacitance response as shown in Graph 2.Then with the help of the two graphs the third graph was plotted pressure verses number of steps of the stepper ,Which is given in Graph 3.This process was repeated for the many capacitive tactels. And the pressure calibration was completed in this way. Finally it was found that stepper motor could exert pressure 19N/M2 per step.
After the calibration of the stepper motor the sensor (elastometer) was calibrated in terms of the pressure and time response. Thus the system with stepper motor used for applying specific amount of pressure along with the data acquisition and data input Output card could be used for acquiring a tactile data. Programs were developed to scan and digitize individual tactels and store the tactile information in the form of a two dimensional array.

After the calibration of the sensor and the system the experiments were performed on the objects like square, triangular, circular and rectangular. The network was trained by generating the learn data file having moments with change in the position, size and orientation of the objects. The trained network was linked with the momentâ„¢s module and derived moments were input to the neural network. Target pattern was set at less than 0.5 for output not belonging to the class and greater than 0.5 for correct class.

For this experiment the position of the object is varied over the array of the sensor. And the moments were calculated for the same object. Then the network was trained with the help of three sets of data by varying its position. Then was observed that network was successful to identify the object which was not included in the training set of the object.

Size of square was varied as 2X2,4X4 ,6X6.Invariant moments calculated from these objects and network was trained then network was given set of the data which was not included in the training and it was observed that the network was successful to give proper identification of the object
The network was trained with set of data by changing its orientation and this network was tested for the data, which was not included in the training set. Finally it was observed that network can identify the objects independent of the size, orientation and position of the object. These experiments have been carried out for the identification of the square, triangular, circular, rectangular, bar type of the object once the training of the artificial neural network has been completed with the help of moment data file. In this way different types of objects were tested and it was concluded that system is intelligent enough to give best results for the identification of different types of objects and describing the object under consideration in many ways. For further analysis of the object the tactile data automatically passed to the different modules of the system.
This system is well suited for the classification of the object with the help of ANN and moments. Classification and identification of the object is independent to size, position and orientation of the object under consideration .This system has capability of describing the object under test in different forms like identification , height ,edge, contact area, pressure distribution ,on the object,3-D representation, orientation, position etc of the object. The system has well support of software for processing the tactile data in different forms and taking any decision after the identification of the object. Finally it is observed that this system is intelligent enough for the identification of different types of the object like square, rectangle ,circle, bar, triangle independent to their position ,orientation and scale and giving its many physical properties .This system has various applications in robotics, medical and tele- operations and in computer vision.
[1].Prasant Kumar Patra, Neural network for invariant image
Classification, Journal of the IETE,vol 42,nos4-5,pp 282-290,July-
October 1994.
[2].R.P.L. Rectier, Tactile Imaging,Security and Actuators, A(1992) pp
[3].G.J. Awcock & R. Thomas, Applied image processing, McGraw Hill,
[4]. Elepart &Bobbins (Eds), Neural Network PC Tools A practical guide

Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: full report on sensing system using artificial neural networks, full seminar report on tactile sensing system using artificial neural network, tactical sensing using artificial neural network, tactile sensing system, object identification by tactile sensing using ann, a neural network for tactile sensing uses, tactile sensing system using neural systems,
Popular Searches: artificial neural networks full report, uses of tactile, tactile sensing system using artificial neural network pdf, artificial neural networks definition, alternate tactile reading systems and moon, seminar language processing using artificial neural networks ppt, a neural network for tactile sensing uses,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  network intrusion detection system project report doc jaseelati 0 359 13-01-2015, 01:15 PM
Last Post: jaseelati
  microturbine generator system seminar report jaseelati 0 308 07-01-2015, 03:42 PM
Last Post: jaseelati
  artificial vision systems for the blind using ultrasonic wave jaseelati 0 262 07-01-2015, 02:49 PM
Last Post: jaseelati
  network intrusion detection system project report jaseelati 0 235 23-12-2014, 03:08 PM
Last Post: jaseelati
  laser ignition system seminar report jaseelati 0 192 23-12-2014, 02:01 PM
Last Post: jaseelati
  the client/server network strategy can handle very large networks efficiently. jaseelati 0 258 11-12-2014, 02:17 PM
Last Post: jaseelati
  witricity full report project report tiger 28 38,076 30-08-2014, 02:26 AM
Last Post: radiopodarok.ru
  ACCIDENT PREVENTION USING WIRELESS COMMUNICATION full report computer science topics 5 7,570 17-04-2014, 11:07 AM
Last Post: seminar project topic
  silicon on plastic full report computer science technology 2 2,931 13-04-2014, 10:34 PM
Last Post: 101101
Last Post: seminar project topic