Telephone Triggered Switches
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar projects crazy
Active In SP

Posts: 604
Joined: Dec 2008
14-08-2009, 03:58 PM

How would you like to be able to energize any electrical device in your home., from any where in the world. and do it without paying for a telephone call? You can do it and it's perfectly legal. With the Telephone Triggered Switches you can do just that. The device described here is a circuit, which responds to the sound of the telephone Deli There is no need to make any hard wire connections to the telephone line, and it is this feature which permits you to build and use this device without any permission from the Department of Telecommunications.

You can't even be charged any tariff for using it in these days of high energy costs, it would be economical to turn off the air conditioning or the hot water geyser before you leave the house, and turn it on an hour before you arrived home. It could be used to turn on the lighting in the house, at night, before you return home.


The TTS is a fairly precise device that would find a use in many a home. It basically consists of circuitry that detects the telephone ring, which then is passed on to the Counter & decoder Section which keeps a track of the number of rings received. Upon the reception of the rust ring, a ninety-second timer is triggered. The, Whole -operation should be completed within this 90-second period or the entire circuitry is reset.

Two devices can be connected to the TTS. The first device can be activated by calling the telephone number and terminating the call after 2 rings. The same telephone no. has to be called again after a gap of 25-40 seconds and then allowing for 2 more rings, following which, the call has to be terminated. For the second device to be activated the sequence o be followed is 2 rings, followed by a 25-46 second gap followed by 4 more more rings. The gap between the two sequences of rings should not fall short of 25 seconds, else it may reset the TES.

After the second ring is received, the 25-second timer is triggered. If a third ring were received before this delay is over, the TTS would reset. This precautionary measure prevents accidental activation of the devices connected to the TTS
Upon the completion of the 25-second delay, the third and fourth rings are received. When the 4th ring is received the 25-second timer is triggered for the second time. The relays for the two devices will be activated only after this 25-second delay. This is again a precautionary measure, since if the TTS were to receive more than the specified number of 2 rings (for device 1) or 4 rings (for device 2), the relays will not activate.

If, after the 25-second delay the decoder shows a total of 4 rings, then relay 1 is energized, which in turn activates device 1. Or if a total of 6 rings were received device 2 is activated by means of relay 2. After the completion of 90 seconds the ITS is reset, but since the relays used are of the double contact type the connection of the device, to the 230 volts mains, does not break. So the device remains on once it is activated by the TTS.
Use Search at wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: telephone triggered switche, telephone triggerred switches, telephone triggered switches, call triggered switch, telephone switching projects, telephone switch idea, phone triggered switch,
Popular Searches: how to control a dc motor with 4 push switches, zigbee light switches, telephone by the beatles, telephone operated devices, projects on telephone trigger switches, bsnl switches room of exchange, changable telephone number,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
Last Post: Dhanabhagya
  Automatic Changeover Switches seminar tips 0 313 15-02-2013, 03:00 PM
Last Post: seminar tips
  To demonstrate the working of logic gates using bulb, battery, and switches Report project girl 0 392 02-02-2013, 09:57 AM
Last Post: project girl
  Telephone Answering Machine report project girl 0 323 14-11-2012, 12:40 PM
Last Post: project girl
  Remote control of Appliances through Telephone project girl 0 361 02-11-2012, 03:40 PM
Last Post: project girl
  Control Solution using Logic, Analog Switches, and Discrete Semiconductor Devices project girl 0 293 02-11-2012, 01:23 PM
Last Post: project girl
  AUTO Telephone ANSWERING seminar flower 0 304 30-10-2012, 11:26 AM
Last Post: seminar flower
  Microcontroller Based Code Lock With Security Telephone Dialer: seminar flower 0 373 30-10-2012, 11:24 AM
Last Post: seminar flower
Last Post: seminar flower
  Long Distance Satellite Telephone (LDST) seminar paper 1 936 18-08-2012, 11:10 AM
Last Post: seminar girl