Warehouse Management System (WMS)
Active In SP
Joined: Mar 2010
21-04-2010, 11:38 PM
The majority of the problems that occur in the warehouse occur because of a lack of
control: a lack of inventory control, operational control and/or management control. To become a dynamic, consistent organization, all the operations must be under control. In order to achieve this control, all the tools and technology available has to be used to get control and manage the warehouse operations. A control system is a means, mechanism or procedure by which we manage these operations. There are three basic objectives of a control system, either manual or computerized:
To identify and coordinate the work that has to be performed.
To direct the achievement of the work to maximize performance (productivity of warehouse resources and customer satisfaction) and minimize or eliminate human errors.
To report the status of the work that needs to be, or was, done.
A manual control system uses physical, paper-based technology to attempt to optimize warehousing operations. Due to the rate of change, demands for accurate, real-time in-formation, next-day-service mentality and marketplace competition, the use of manual systems in the next millennium will be unrealistic. A computerized warehouse management system (WMS) is the integration of bar coding technology, Radio Frequency (RF) communications equipment, hardware and software. Warehouse management software has the capability to optimize the warehouse and warehouse-related operations. Whereas the sophistication of manual control systems is low, the sophistication of WMSâ„¢s can vary from simple stock location control to systems that truly optimize customer service, space, labor and equipment in the warehouse. It is important to note that one should not confuse WMS technology with business systems applications that impact the warehouse. A WMS is an operating tool that is based upon the needs of the warehouse operation and provides tools and information for the management of the warehouse.
To have a better understanding of the requirements of a warehouse and thus, the benefits of the warehouse management systems we first introduce the basic functions of the warehouse and then we can get into the benefits of having a WMS implemented in the daily operations.
Traditionally a warehouse performs four basic functions: (1) receive product, (2) store product, (3) pick product and (4) ship product.
The basic functions in the receiving area are: the packaging of raw materials from suppliers, finished goods from manufacturers and other sources, and customer returns. Generally, receiving operations have two major needs:
The need to have accurate receipt information with advanced notice, this facilitates the receiving operations by providing accurate and quick information from the senderâ„¢s host system directly to a WMS. This system translates receipt information into usable information for dock activity planning, order release and inventory allocation.
The need to reduce the time the product spends in staging. A WMS minimizes the time the product sits in staging due to operator-directed put-away and system-directed put-away and system-directed put-away locations.
The basic functions in the storage area are: quality inspection, put-away, product location and lot control and crossdock operations. The typical needs with respect to product storage are:
The need to have adequate identification and tracking of product that are ready for put-away.
The need to have an automatic selection of storage locations for pallets loads, designed to maximize space utilization, picking efficiency and minimize retrieval or put-away labor.
The need for a stock location system that tracks identity and quantity of each SKU by unique storage location (in order to ensure product trace ability to customer).
The real-time update of inventory, locations of lot and stock records to provide timely information. The more real-time update, the greater the reduction in the information lead time.
The ability to cycle count inventory by storage location, as opposed to a physical on-hand inventory count. A WMS, uses cycle counting techniques.
A major deficiency in many warehousing operations is the absence of a stock location system. Knowing where and how much of a product is in the warehouse, is a basic fundamental to success of the operation. The absence of a stock location system requires that the inventory accuracy be reliable. Usually this implies counting the entire on-hand inventory for a single SKU. This process is not only labor intensive, but also can be affected by human error. A WMS provides the feature of cycle count by location, record accuracy can be verified by location. The result is a drastic decrease in labor requirements and time and a dramatic increase in inventory accuracy.
The basic functions in the picking area are: raw material picking, work in progress picking and finished goods picking. The shipping needs of a warehouse typically include:
The need to select specific storage locations for picking based parameters such as lot number, stock rotation, order quantity and pick location.
The need to minimize pick travel distance and multiple handling by pre-route and pre-post customer orders in storage location sequence.
The need to perform case picking and broken case picking.
Again the need for a stock location system is essential, since it provides a the foundation for efficient order picking. The picking functionality provided by a WMS is designed to exploit the existence of the stock location system to further maximize the picking efficiency. The ability of the computerized control system allows to minimize the picker travel time between picks and maximize actual time spend picking during discrete picking.
The typical shipping needs include:
The routing of picked goods to predetermined staging lanes for order control and consolidation from multiple pick zones.
Automatic bill-of-landing generation.
Automatic updating of customer files.
Automatic shipping notification to customer (via EDI ).
The shipping functions are designed to maximize the control of orders moving through packing, checking and loading. In addition, bill-of-landing, packing list, and customer file updating are used to minimize manual clerical tasks to reduce labor and improve accuracy and customer service.
2.4. Other Warehouse Function Capabilities.
There are other functional capabilities required by every warehouse. Some of these need include:
The ability to maintain product data files.
The ability to generate activity reports in order to manage warehouse performance.
The ability to monitor employee performance through transaction activity accumulation.
The creation of an audit trail to facilitate error corrections in warehouse activities.
The ability to track and access order status from order entry through shipping.
The ability to provide access as needed, maintaining data security.
The ability to facilitate efficient material replenishment.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Active In SP
Joined: May 2010
03-05-2010, 02:38 PM
all the details, seminar and presentations , reports about warehouse management system project and implimentation
Active In SP
Joined: Feb 2012
14-03-2012, 01:21 PM
to get information about the topic "warehouse management system" full report ppt and related topic refer the link bellow
|Tagged Pages: what is warehouse management systems wms ppt, wms management ppt, furniture system, warehouse management system ppt 2010, warehouse management ideas, warehouse management ppt, warehouse management software,|
|Popular Searches: what is warehouse executer, wms labor managment ppt, warehouse executor abstract, project report for warehouse, warehouse management system project report, warehouse project in v b, comcast,|