project and implimentation-seismic sensor
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Active In SP

Posts: 1
Joined: Jul 2010
07-07-2010, 06:53 PM

plz give some introduction to seismic sensor.....
project report helper
Active In SP

Posts: 2,270
Joined: Sep 2010
18-09-2010, 04:39 PM

More Info About project and implimentation-seismic sensor

This circuit simulates a seismic sensor to detect vibrations/sounds. It is very sensitive and can detect vibrations caused by the movement of animals or human beings.So it can be used to monitor protected areas to restrict entry of unwanted persons or animals.The circuit uses readily available components and the design is straight forward.A standard piezo sensor is used to detect vibrations/sounds due to pressure changes.

The piezo element acts as a small capacitor having a capacitance of a few nano farads. Like a capacitor, it can store charge when a potential is applied to its terminals. It discharges through VR1, when it is disturbed.

In the circuit, IC TLO71 (IC1) is wired as a differential amplifier with both its inverting and non-inverting inputs tied to the negative rail through a resistive network comprising R1, R2 and R3. Under idle conditions (as adjusted by VR1), both the inputs receive almost equal voltages, which keeps the output low.TLO71 is a low-noise JFET input op-amp with low input bias and offset current. The BIFET technology provides fast slew rates. Capacitor C1 is provided in the circuit to keep the differential input of IC1 for better performance.When the piezo element is disturbed(by even a slight movement), it discharges the stored charge. This alters the voltage level at the inputs of IC1 and the output momentarily swings high as indicated by green LED1. This high output is used to trigger switching transistor T1, which triggers monostable IC2. The timing periodof IC2 is determined by R7 andC5. With the shown values, it will be around two minutes. The high output from IC2 activates T2 and the buzze rstarts beeping along with red light indication from LED2.

Assemble the circuit on a common PCB and enclose in a suitable cabinet.Connect the piezo element to the PCB using single-core shielded wire. Enclose the piezo element inside a rustproof,small aluminium box. The piezo element should be firmly glued to theen closure facing the fine side towards the case. Fix the sensor assembly on the back side of a ceramic tile or granite tile with good adhesive. Fix the tile(or bury it in the earth) near the entrance with the sensor assembly facing downwards. Whenever a pressure change develops near the sensor, the circuit will be activated.

reference by http://engg-project and
Active In SP

Posts: 4
Joined: Apr 2011
30-04-2011, 12:47 PM

project and implimentation report on seismic sensor
Active In SP

Posts: 5
Joined: May 2011
02-05-2011, 04:38 PM

Measuring seismic activity is very essential for predicting earthquakes. Many such measuring devices are placed at various places of the world. But for a better prediction covering an entire area is very important. A collection of zigbee sensor networks can help to do this. Many zigbee enabled seismic sensors can be deployed at various places especially city under grounds to monitor seismic patterns.

The data collected by each sensor will hop through the zigbee network to reach a wifi station from where it will be transmitted to a server. Several such networks deployed across the world sending seismic activity to a central server can be set up. All this data on the server with proper analysis can help in predicting changes in seismic activity and may be and earthquake.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: mini project on seismic sensor, introduction for seismic detector, seismic sensor working ppt, seismic detector ppt, project report on seismic sensor, project of sesmic sensor, minor project report for seismic sensor,
Popular Searches: seismic sensors basics, seismic processing project pdf, abstract for seismic sensor project, seismic data processing book, seismic sensors principle, prroject report on office management in pdf, how to use peizo element in seismic sensor,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
Last Post: Guest
Last Post: seminar project topic
  mechanical engineering project and implimentation harshil717 3 2,072 18-01-2014, 01:05 PM
Last Post: Guest
  sppining mill project and implimentation Guest 0 616 06-11-2013, 01:09 PM
Last Post: Guest
  Detail of project and implimentation abstract Guest 1 540 23-08-2013, 09:46 AM
Last Post: study tips
  project and implimentation rajali 1 563 07-08-2013, 09:44 AM
Last Post: study tips
  topics for mechanical engineering project and implimentations for final year students aaaakki 13 14,222 30-07-2013, 03:32 PM
Last Post: Guest
Wink eclipse project and implimentation kktr317 1 810 27-06-2013, 01:10 PM
Last Post: study tips
  dream home project and implimentation crecent123 1 510 29-05-2013, 09:12 AM
Last Post: study tips
  project and implimentation ppt on 8051 micro controller based gsm controlled robotic arm shivaraj71 1 909 15-05-2013, 09:30 AM
Last Post: study tips